AquaCure® Model AC50

The AquaCure® Model AC50 is manufactured by George Wisemen of Eagle-Research, the foremost authority on HydrOxy. The AquaCure AC 50 is the MOST ADVANCED and user-friendly Alkaline WaterHydrogen Rich Water and HydrOxy for Health machine on the market today. It is developed from 30 years of electrolyzer manufacturing experience plus feedback from thousands of customers.

The AquaCure® Model AC50 is a practical, reliable and SAFE machine designed to give decades of trouble free service.  Eagle-Research offers an unbelievable 1 year money back guarantee (no questions asked) as well as a lifetime manufacturer’s warranty on the unit. All orders are placed directly with Eagle-Research using the link below. Free technical support is available anytime.

Description

The AquaCure AC50 can generate up to 50 liters per hour (lph) of mixed hydrogen and oxygen gases.  This is about 830 mL/m of 66% hydrogen and 33% oxygen…

This specific mixture of gasses has MANY trade names like Brown’s Gas and HHO. For the purpose of the AquaCure AC 50 we’ll call this gaseous mixture HydrOxy.

Why would you want HydrOxy in your life?
Why is HydrOxy better than pure hydrogen?

Why would you want the AquaCure over all the ‘other’ hydrogen for health options in the marketplace?  People who do the research and comparison have no problem seeing that the AquaCure surpasses all other options for practical and therapeutic use… And is less costly than many options that do not have the same safety or functional features.

The AquaCure is LOADED with SAFETY features (see below).

The AquaCure can be used continuously with minimal maintenance
(just add pure water as needed and rinse it about once every 100 hours).

The AquaCure ‘looks commercial’ because it is built to worldwide industrial and safety standards.  Eagle-Research focused their attention on achieving safety, functionality, effectiveness, user-friendlyness and durability while keeping the cost as low as possible.

For LEGAL REASONS Eagle-Research and New Image Lifestyles, Inc. state up front that the AquaCure is NOT yet defined as a MEDICAL DEVICE and therefore cannot legally recommend it for human use. ‘Legal’ uses would be for plants, fish, birds and other mammals.

Hundreds of scientific studies have proven that it is safe for plants and animals to use for drinking and breathing.  Current studies are proving that humans are having all the same benefits proven on Plants and Animals. 
Note: A review of all the studies (including on humans) shows NO negative side effects of hydrogen, only positive benefits.

POWER REQUIREMENTS
The AquaCure is 110-125 VAC 60 Hz (North American standard) If you want a version compatible with 220-240 VAC 50 Hz, STATE THAT IN YOUR ORDER COMMENTS, as you check out.

ONLINE RESOURCES
AquaCure comes with access to AquaCure Online Resources which will give you instruction videos, tips, options and (quite frankly) anything we can think of to enhance your user experience.  The online Resources are updated as needed to assure that you will always have access to the most recent information.
Click here to see an impromptu AquaCure AC50 Setup and Operation Video.

Here is the Setup and Operation Manual.

LIFETIME WARRANTY
Warranty includes parts, labor and shipping if an issue is manufacturer related. If the Warranty is invalid (because of resale or user damage), the company will still repair any issues for lifetime if purchaser pays for parts, labor and shipping.

100% SATISFACTION GUARANTEE: Eagle-Research nor New Image Lifestyles, Inc. cannot guarantee any particular result because every body is different.

However, because Eagle-Research is SO CERTAIN you’ll be happy with the machine, they have a 100% no questions asked one YEAR money back satisfaction guarantee (from the date you receive the machine).

You don’t need to state a reason if you want to return the machine (even after used for 12 months), just ask for an RMA number and instructions to properly send it back and (once they receive the machine) they will refund your purchase price (shipping, taxes and duty costs not refunded).

CONTINOUS OPERATION
AquaCure is able to operate continuously without over-heating.  Some electrolyzers ‘out there’ can only operate for a short time (often less than an hour) without having to be shut off to cool down.  The AquaCure is designed to operate 24/7 and doesn’t even need to be shut off when refilling with water.

LOW LIQUID LEVEL SHUTOFF
AquaCure shuts off the gas production when liquid level gets low.  AquaCure also has a low level alarm and indicator light, so there is no question when the liquid is low.  This feature even makes the AquaCure usable by the blind.

Low level control also allows the AquaCure to be used as an oxygen source for Mammals needing a bit of additional oxygen…
… with the additional benefit of getting hydrogen (something an oxygen concentrator or bottled oxygen can’t do).

ADJUSTABLE GAS PRODUCTION
The AquaCure model AC50 made gas volume adjustment convenient and accurate with electronic buttons and display so that a person can KNOW EXACTLY how much HydrOxy is being produced… And this is VITAL, not only for safety but to individually optimize the effectiveness of all the HydrOxy protocols.

WE WANT YOU TO BE SAFE!  So we tell you the hard truths no one else will AND we design the AquaCure to be SAFE.

Mixtures of air that contain MORE than 4% hydrogen are potentially EXPLOSIVE.  So the SAFETY SOLUTION is to prevent breathing a mixture that contains more than 4% hydrogen…

…The AquaCure AC50 is specifically DESIGNED to help you prevent breathing a gas mixture that contains more than 4% hydrogen.

Breathing some hydrogen has been proven beneficial in hundreds of scientific studies, the studies are usually done at 2% hydrogen in air; for safeties sake; and at 2% there is still a full therapeutic health benefit with NO negative side effects. There is NO practical need to exceed 2% hydrogen in the inhaled breath.  Once the blood is saturated, you exhale almost as much as you inhale (the body just ejects the excess).

The AquaCure Model AC50 can have FULL GAS PRODUCTION (50 lph) for all other applications / protocols AND then the gas production can easily and appropriately be reduced to keep the mixture breathed ‘non-explosive’ for any sized ‘mammal’. 

VARIABLE FREQUENCY
One thing that current medical science is ‘re-discovering’ is that frequencies matter. So for those people who understand what frequencies will help their ailments, they’ve added the (electronically controlled) ability to ‘impress’ frequencies onto the HydrOxy. 

EXTRA RESERVOIR

Eagle-Research added a ‘reserve’ tank to the machine, so it can operate for hours longer between ‘refills’.  This is needed when using the AquaCure for applications requiring continuous use.  At 100% gas production the AquaCure AC50 can go 10 hours on a fill; if ‘breathing’ at 40% production, the AquaCure AC50 can operate over 24 hours on a fill.

HUMIDIFIER (lye scrubber)
The function of the Humidifier is to filter out any residue of lye (NaOH) that comes out of the machine with the gas.  It normally does a really good job.  If there is not enough liquid or if it isn’t changed often enough, this function becomes compromised.

HOUR-METER
Even though the AquaCure was designed for a 20+ year service life, all equipment needs some maintenance.  So they’ve included an hour-meter to make it easy to know when to do the maintenance rinsing, (about every 100 hours of 100% use).
The meter is designed to give a ‘true use’ reading, so if (for example) you are using your AquaCure at 25% gas production, the meter will ‘slow down’ by 75%; thus when it finally reads 100 hours, it will be ‘as if’ it was 100 of 100% hours, even if it took 400 ‘actual’ hours to reach that reading (because you were running at 25%).

ADEQUATE GAS VOLUME 
AquaCure Gas Volume is sufficient (~ 50 LPH) to ‘charge’ water quickly and supports the 4 treatment protocols (plus the potential of NEW water).

You Can:

  1. Bubble (infuse the water with HydrOxy) for healthful drinking and for feeding to plants and animals.  Can also be used to enhance hydroponics, aquaponics, fish growth, etc.
  2. Bubble (infuse the water with HydrOxy) for topical treatment of skin issues and wounds.  Also bubble foot bath or bath water for full body treatment.
  3. Bag limbs to use HydrOxy gas for external treatment of skin, wounds and various pain relief (like arthritis and carpel tunnel).
  4. Direct BREATHING (inhalation) of HydrOxy gas (hydrogen / oxygen mixture), to efficiently put the hydrogen directly into the blood for fast, efficient whole body hydration.
  5. Eagle-Research is developing application protocols that use ‘NEW WATER’ that is generated by collecting the condensation of the HydrOxy flame.  The AquaCure is designed to ‘make’ New Water (using the correct attachments).  More on that subject will be introduced in the future; just note that the AquaCure is ALREADY DESIGNED for astonishing attachments to come.

TIMER/ON/OFF SWITCH
AquaCure has a timer switch, for convenience and efficiency.  Treatments can be easily timed so no gas is produced beyond timing needed.  It shuts itself off when you are finished. The timer switch also has a ‘continuous’ setting, so that HydrOxy can be produced for extended times (until the low liquid level sensor shuts it off).

SAFETY CERTIFIED
AquaCure is built to Canadian CE safety standards, and then UPGRADED to pass CSA/UL and Australian safety standards. There’s no USA law that states any machine needs to be safety certified to be sold, but some business insurance plans require ALL equipment used in a building be safety certified.

Besides, wouldn’t YOU feel more secure using equipment that has been completely and independently inspected, tested and SAFETY certified to rigorous industry agreed standards?

OVER-PRESSURE SAFETY
AquaCure model AC50 has a 2 psi electrical shutoff AND a 3 psi over-pressure gas relief.

These are IMPORTANT safety factors because when water is turned into gas, it expands and  ‘wants to’ take up 1800 times more space.  If confined to a specific volume, (enclosed container without release) the internal pressure rises until the machine bursts and/or explodes.

Since the HydrOxy is used as created, on-demand, (never stored) there should never be a case where the pressure would rise too high…

Further, over-pressure control (along with an appropriate torch and backfire filter) then allows the HydrOxy to be safely used to fuel a torch; a nice additional useful feature to have.

BENIGN ELECTROLYTE
AquaCure uses a lightly caustic electrolyte mixture designed to achieve practical efficiency with minimal foaming and to promote long internal plate life. (about 3 ounces (85 grams) of lye in about a quart (1 liter) of water). This mixture IS technically caustic but can be safely used if appropriate care is taken.  It’s about as caustic as strong dish soap.

WHAT COMES WITH MY MACHINE?

1. Basic Setup and Operation Manual (updates, upgrades and additional information will be in the online AquaCure Resources).

2. Tower Cap (with check valve installed) + regular cap for shipment.

3. 1- Humidifier (to scrub HydrOxy of any possible lye mist) + Humidifier attachment hose and Humidifier Holding Bracket (screws onto side of AquaCure for convenience)

4. 1- Medium (1 liter) Drinking Water Bubbler + 3 foot Humidifier to Drinking Water Bubbler attachment hose so you can set up to infuse your drinking water AT THE SAME TIME as safely breathing the gas.

5. 1- Additional bubbling stone so you can bubble the HydrOxy into other containers of water, including foot baths, etc.

6. 1- Soft Silicone HydrOxy Spot Applicator for spot treatment of eyes, sore muscles, wounds, rashes, age spots, etc.

7. 1- 5 foot Accessory hose + hose adaptors
(for above Spot Applicator and remote bubbling stone)

8. 1- Nasal Cannula for Inhalation; (also can be used for bubbling and/or bagging).

9. 1- 50 mL syringe; to fill the AquaCure with water.

10. 1- pair of safety Goggles

11. 1- pair of Nitrile Gloves

12. 1- Drip Cloth Eagle-Research’s business is primarily based in the USA, so all orders are in USD. Their USA facility is currently working on R&D projects, so for now all orders are shipped from their Canadian facility in Ontario Canada. As mentioned above, all orders from this New Image Lifestyles, Inc. website are routed directly to Eagle-Research.


PayPal Financing Available

For people who find the upfront cost of the AC50 too high for their budget, USA PayPal offers a financing option.

The financing is 6 equal monthly payments + a small finance fee.
To get the financing, just purchase the product using the PayPal option as you check out (you’ll need a registered PayPal account) and the financing option will automatically be presented to you (if you qualify) during the normal checkout (payment) process.

The ‘finance option’ is presented to you once you ‘log into’ PayPal but BEFORE you actually purchase, so you can see if you quailify before actually spending your money.

Most people who have had their verified PayPal account for longer than 3 months will qualify for financing.

Questions about the “Bill Me Later” PayPal financing program should be directed to PayPal Customer Support at (866) 528-3733

Obviously the PayPal phone number above will give you the most updated information but here is our understanding about getting a qualifying PayPal account.
1. Apply for a PayPal account (it’s free at PayPal.com).
2. Attach at least 1 bank account and credit card (even if it’s a debit card).
3. Use the account for online purchases and handling money transfers (at least a few transactions, to/from bank or credit card). Thanks for your interest in the AquaCure® AC50. Please email lifestyle@cindyf78.sg-host.com if you have any questions!


SKU ER1-D1-0010, 24 lbs (shipping weight), 18″Lx16″Wx14″H (shipping box size). The AquaCure itself is about 12 inches high (excluding the 10 inch Tower Cap), 12 inches long and 9 inches wide and weighs about 16 lbs in operation.

Eagle-Research is primarily based in the USA, so all orders are in USD.  But their USA facility is currently working on some R&D projects, so for now all orders are currently shipped from our Canadian facility in Ontario Canada.

 Due to (present) manufacturing development and market studies, shipped product may look slightly different from depicted.